A vital tool in the production process is MIDI, with it's ability to compose, arrange, and edit musical performances. Whether using Virtual Instruments, or Hardware Synthesizers, one common thing that needs to be done is to Record the sound of these synthesizers as Audio Tracks. Let's take a look at different ways you can do this in Pro Tools.
MIDI is one of the most powerful tools used in modern music production. It essentially serves as digital sheet music that our instrument plugins and external synth modules can read and playback in real time. However, MIDI by itself produces no sound-”it requires a virtual instrument, synthesizer, or other piece of MIDI-equipped hardware/software to read the MIDI data and playback sound. When working in Pro Tools, you may want to take an Instrument and/or MIDI track and record them onto an Audio Track. In this tutorial, I will show you a few different ways to accomplish this.
First off, let’s discuss why we might want to record our MIDI data as Audio in the first place. Here is a common scenario: you are collaborating on a music project with other producers and songwriters. As a producer, you have decided to add a few Instrument tracks that feature some of your favorite virtual instrument plug-ins (e.g. Omnisphere, Massive, Spitfire Strings, etc.). However, the producers with whom you are collaborating might not own all the virtual instruments you have used in the session. If they try to playback the Instrument tracks without owning those particular virtual instruments, no sound will playback-”as stated above, MIDI itself produces no sound. In this case, you will want to record your Instrument Tracks to Audio Tracks since all computers will be able to playback the audio as it was recorded.
In addition, many virtual instrument plug-ins require lots of processing power. If you have 20+ tracks of high-quality orchestral samples, your computer may begin to struggle during recording and playback. If you record your virtual instruments to Audio Tracks, you will free up your computer’s resources as it will no longer need to be recalling individual samples during playback.
One of the primary ways we can record our MIDI data to an Audio Track is to route the output of our Instrument/MIDI Tracks to the Input of an Audio Track, then record the audio in real-time.
To do this, first create a new Audio Track by navigating to Track > New… or by using the keyboard shortcut Shift+Command+N (Mac) or Shift+Ctrl+N (Windows). Here, I have a stereo Instrument Track that I want to record to an Audio Track, so I’m going to create a stereo Audio Track. I’m going to name it "Piano Print." Click "Create" to create the new audio track.
Next, I’m going to change the Input of the Audio Track to an available Stereo Bus. Click on the Input dropdown menu on the Audio Track, then navigate to "bus," then select an available Stereo Bus. Bus 1-2 is available for me, so I’m going to select it.
After the Stereo Bus is selected for my Audio Track Input, I’m going to select the exact same Bus for my Instrument Track Output, as shown below.
With these I/O settings configured, the MIDI playback from my Instrument Track will be sent to the Audio Track, where it can be recorded in real-time. To do so, arm the Audio Track for recording, then hit Record (or press 3 on the Numeric Keypad). As you can see in the figure below, the Audio Track is receiving the audio from the Instrument Track and recording it as audio in real-time. Once recorded, you may select "Hide and Make Inactive" for your Instrument Track.
One of the major benefits of recording MIDI to Audio Tracks in this way is that you can record multiple MIDI/Instrument tracks to a single Audio Track or multiple Audio Tracks. For example, in the figure below, you can see that I have added a second Instrument Track, labeled "Pad," and set its output to Bus 1-2 as well. I then recorded on the Audio Track using the exact same method as above, thus resulting in one audio track that contains the recorded audio data from both the Piano track and Pad track.
While this method of recording MIDI to Audio Tracks is effective and extremely useful for recording more than one MIDI source, recording playback in real-time is not the fastest method. That’s why Pro Tools also allows methods for offline bouncing as well.
One of the simplest methods to bounce a single Instrument/MIDI Track is to select all the clips you want to record as Audio. Then, using the Grabber Tool, drag the selected MIDI clips to an empty Audio Track. A progress bar will appear, showing the status of the bounce. When finished, the selected clips will be bounced to the Audio Track!
One final method for bouncing MIDI data to an Audio Track is to use Pro Tools’ "Commit" function. One of the benefits of this method is that you don’t have to create any new Audio Tracks yourself-”once you select the Commit option, Pro Tools will create a new Audio Track automatically.
First, select all the clips that you want to be rendered into Audio. Then, navigate to Track > Commit, or use the keyboard shortcut Option+Shift+C (Mac) or Alt+Shift+C (Windows).
Once selected, the Commit Tracks dialog box will appear, giving you options on what information will be included in the render. You can select or unselect Volume and Mute, Pan, Sends, and Group Assignments. By the Source Tracks option, you can choose what happens to your Source Tracks-”Do Nothing, Make Inactive, Hide and Make Inactive, or Delete.
After you click "OK," Pro Tools will Render your selected MIDI Clips as Audio. Pro Tools will automatically create a new Audio Track, and will name it after your Source Track, including a ".cm" for "commit." If you decide to commit MIDI clips from multiple tracks, Pro Tools will automatically create multiple Audio Tracks as well.
Additionally, you can commit an entire track at once by right-clicking the Track Name, then selecting "Commit" from there. This way, you don’t have to select each clip individually on a track if your goal is to commit the whole thing.
Whether you’re collaborating with other artists, or recording your own material, it’s always a good idea to bounce your MIDI as Audio when you’re finished with a project. You can save yourself a lot of headaches by having the audio files, instead of just relying on the synthesizer to be there. It is the best way to preserve your sound for the future.
Alex Thomen
Author: Alex Thomen
Composer / Arranger / Pro Audio Instructor
ProMedia Training, LLC
www.protoolstraining.com
888-277-0457